So about two years ago I was feeling ambitious so I started searching the web for easy free sewing patterns. I wanted to make something that was worth my time. Something that was going to be useful not just something I'd attempt to make then let it just sit around collecting dust. I decided I'd like to make some type of a bag. Find some fun fabric and teach myself how to make it.
As I searched through the web, I came across so many things I wanted to make, but the reality was since that 7th grade class I really didn't use a sewing machine. To back up a bit, before this huge web search, I begged my husband to buy me a sewing machine. So yeah he did, so pretty much as soon as it arrived I began the search! I bookmarked everything I'd like to attempt making someday, so I could go back later and check them all out. I came across this reversible sling bag! As I read the instructions I felt good. It said it was the easiest bag to make and believe or not they weren't lying! This bag is the easiest, best little bag for a beginner like myself. So I wanted to share it with everyone because it turned out just as it was pictured and I was so proud!
After I made my very first bag, I literally made one for my daughter, sister and a friend of my daughters was visiting so decided to make her one. If I can do this believe me anyone can! So try it out here is what you will need:
Supplies:
1 yard of exterior fabric
1 yard of interior fabric
Printed pattern pieces + one piece of 8.5 X 11 paper
Scissors, pins, sewing machine, thread
Print the 2 pattern pieces. Lay them and the extra piece of paper out like this:
Tape the pieces together without overlapping.
If you fold your yard of fabric in half again lengthwise, matching the fold from the bolt to the selvages, you can cut out both pieces at once. BE SURE TO PLACE THE LONG EDGE OF THE PATTERN PIECE ON THE FOLD!!!
You’ll cut 2 pieces from your exterior fabric and 2 pieces from your interior fabric, so you’ll end up with 4 pieces that look like this:
The assembly instructions are the same for the exterior and the interior pieces. All seams are 1/2”, unless otherwise specified.
Place pieces right sides together and sew side seams (indicated by the red lines).
Press seams open.
Line seams up (pin, if you want) and press flat. Sew bottom seam, as indicated by the red line.
Next we’re going to box the corners. Fold/press/whatever your corners like this:
The measurement along the green line is about 1.5”. The measurement along the yellow line is about 3”. I drew a line with a disappearing ink pen to follow when I sewed.
Sew along the line and then clip off the excess fabric.
Turn the exterior bag right side out and slip it inside the interior bag. Match up seams and ends and pin.
Decide which one of the ends of the strap is going to be the “big” one. You’re going to turn the entire bag right side out through this end. There will be a moment when you’re not sure how it’s going to work out, but trust me, it will…just like child birth. Mark it somehow. I used 3 pins.
The other end of the strap will be the “small” one. When you sew this end, you’re going to want to taper it *just* slightly. The blue lines indicate the normal stitch line. The purple lines are how you’re going to sew this end.
I exaggerated the lines in this picture for illustration purposes. I’d start the taper about 1” from the end and taper in maybe 1/8” on each side.
Sew from the end of the strap, around the curve and up the other strap. For some reason the picture or this step is missing, so I made you a super helpful illustration:
You’ll be sewing along the big U shape and leaving the green lines on the ends open. Be sure to taper the “small” end. Repeat on the other edge.
You can clip the curves a bit now if you want to. I did on one bag and I did not on the other. I found it didn’t make a whole lot of difference, so do whatever makes you happy.
Now you’re going to turn the whole thing right side out through the “big” end.
Go slowly and be sure things don’t get too bunched up. You might need a buddy, but I promise this WILL work.
Press along the seams.
Take the “big” end and fold down approximately 1/2” to the inside.
Press.
Slip the “small” end inside the “big” end.
And stitch a cute little rectangle to hold everything in place.
No comments:
Post a Comment